Rod for lever with stand Manufacturer,Supplier and Exporter in India
Product Code : SCL-MH-12639
Quick Answer: The Rod for Lever with Stand is a 50 cm lever rod graduated in 1 cm steps either side of a centre pivot, mounted on a cast iron base and a chrome-plated steel pillar. It is used to verify the law of moments and to show the three classes of lever.
Last updated: October 2026
Key Features
- Lever rod 500 mm long, graduated in 10 mm steps outward from a 0 centre mark
- Two adjustable sliding stirrups with load hooks
- Trim screws at both ends for setting the beam level before loading
- Die-cast iron base, about 150mm x 100mm, with a baked enamel finish
- Chrome-plated steel pillar, about 450mm high and 10mm in diameter
Technical Specifications
| Specification | Value |
|---|---|
| Rod length | 500 mm (50 cm) |
| Graduations | 10 mm (1 cm) from centre zero |
| Base | Die-cast iron, about 150mm x 100mm, enamelled |
| Pillar | Chrome-plated steel, about 450mm high, 10mm diameter |
| Accessories | 2 sliding stirrups with load hooks |
About This Product
The rod is set level on its pivot with the trim screws, slotted masses are hung from the stirrups, and their distances from the fulcrum are read off the scale. Students adjust loads and distances until the beam settles level and compare the moments on each side. Moving the fulcrum and the points of effort and load shows class 1, class 2 and class 3 levers. The Rod for lever with stand can be supplied on export terms to Rwanda, Zimbabwe, Cameroon, Fiji and Grenada.
Frequently Asked Questions
Can the Rod for Lever with Stand show all three classes of lever?
Yes. Changing the position of the fulcrum and where the effort and load hangers attach demonstrates class 1, class 2 and class 3 levers.
Related: Mechanics & Heat and Rod for levers.
For a quotation on the Rod for lever with stand, contact Educational Instrument.
